How to improve the durability of aluminum alloy protective film

- Nov 03, 2019-

The aluminum alloy protective film is a protective material for the periphery of the aluminum alloy, and has a certain material for maintaining the long-lasting use of the protective film. However, after investigation, the aluminum alloy will be damaged in less than one year after installation. Many household aluminum alloy protective films are not used for a long time and do not play a long-term protection role. Under normal circumstances, the protective film can be used for more than 3 years, so you can appropriately improve the durability of the aluminum alloy protection touch, and how to do it?

According to our Shandong Jiarun New Materials Co., Ltd., the reasons why the protective film can not be used for a long time are as follows:

1. Man-made destruction

When it comes to man-made damage, there are basically the following types, which are destroyed and destroyed by themselves during transportation and installation. Because it is easy to damage the protective film during manual transportation and installation. Then, after the installation, the protective film was inadvertently or intentionally damaged. But the above situation is relatively rare.

2. Environmental climate impacts

The impact of the environmental climate may be due to overheating of the outside world or frequent rain. Of course, there is also an indoor environment, such as soot, which will have a certain impact on the aluminum alloy protective film.

3, the quality of the protective film

The quality of the protective film is also an important factor affecting the long-lasting use of the protective film. Some protective films don't take long as they can rot. Therefore, everyone must choose a good manufacturer when purchasing aluminum alloy protective film.

Therefore, we can conclude that in order to improve the durability of the aluminum alloy protective film, the following points must be achieved:

1. Avoid damage to the appearance of the protective film

During the installation process, the installer is required not to damage the protective film, and the family members are required not to damage the protective film.

2, often clean the protective film

The protective film can be cleaned when there is dirt on the protective film. Dry the water after the rain as follows.

3, choose a regular manufacturer to buy

The purchase of aluminum alloy protective film must choose a regular manufacturer, and quality assurance is required, so that the quality of the protective film can be guaranteed.

https://www.snpefilm.com