The self-adhesive film is a new product with high transparency and no offset printing. It has good tensile strength, elongation at break and good puncture resistance. Low-density polyethylene (LDPE) and linear low-density polyethylene (LLDPE) are used as the main raw materials, and the imported self-adhesive materials are uniformly mixed. The three-layer co-extrusion process is used to melt and plasticize through the extrusion system and then through the die and molding. A new packaging material made from molds.
1. The self-adhesive film is easy to stick to the surface of the product, and can be manually packaged and mechanically packaged, with high cleanliness and more beautiful products.
2. The self-adhesive is not affected by moisture, temperature and other environmental influences, and does not affect the surface gloss of the product.
3. After the film is finished, the product will not be damaged by the self-adhesive film and will not cause scratches on the surface of the product.
4. Self-adhesive storage time is long, the surface is peeled off from the mucous membrane, easy to tear, no residual glue.
5. At present, the company has formed a good production system to ensure that quality problems are avoided in all aspects.
There is no traditional glue on the surface of the mucous membrane, but it can be attached to the surface of the corresponding product, such as: ps board, acrylic board, pc board, pvc board, plastic parts, glass, home appliance board, aluminum board, stainless steel board, galvanized board and so on.www.snpefilm.com