Several methods for removing stainless steel protective film

- Jul 13, 2019-

1.Using a hair dryer

Use an electric blower to blow on the stainless steel protective film and then quickly tear it off by hand. Because of the principle of thermal expansion and contraction, the stainless steel protective film will be heated up, so it is easy to tear off by hand.

2.The use of stainless steel protective film remover

Wipe off the dust on the stainless steel surface adhesive tape, and spray the stainless steel protective film remover on the stainless steel protective film that needs to be peeled off. After five minutes to ten minutes, the surface of the adhesive paper starts to foam, fall off and the stainless steel plate and the titanium plate are not bad. as a result of.

3. Use gasoline

www.snpefilm.com