The protective film for sluminum panel, that is, the aluminum plate protective film, as the name suggests, is a substance that protects the surface of the aluminum plate, so as to prevent the surface of the aluminum plate from being scratched and scratched or damaged during transportation, etc., affecting its surface. Aesthetics. Based on this, the next step is to familiarize yourself with and understand the product so that it has a correct understanding of it.
1. Is the protective film for sluminum panel ready for work before purchase?
The protective film for sluminum panel needs to be prepared before the purchase of the product, and it must be taken seriously and carried out, because if the wrong choice occurs, it will have adverse effects. Moreover, these preparatory work can achieve two purposes, one is to reflect the importance of the purchase of the product, and the other is to avoid wrong choices. In the work content, in addition to a clear understanding of the product use environment and use requirements, but also have some basic understanding of the product and the manufacturer, in order to facilitate their own multi-party comparison and comprehensive consideration.
2. What is a good quality aluminum sheet protective film?
The protective film for sluminum panel, which should meet the requirements and requirements, is specifically: the use of materials with good performance and good quality to ensure the quality of the product and the performance of the product; the product should be used Simple and convenient, it is not easy to cause problems during use, and it is not easy to be damaged or damaged, so as to avoid frequent replacement of new ones and increase costs. In addition, the product should have a long service life and be durable.
3. What is a laminated aluminum sheet? Is it a protective film for sluminum panel?
The coated aluminum plate is professionally coated with an adhesive film on the surface of the aluminum plate, and the thickness of the film is 0.03 - 0.07 mm, so as to prevent the aluminum plate from being scratched during processing, etc., affecting the appearance of the surface. . Also, a single-sided or double-sided film can be selected as required, but additional filming costs are required. If the demand is relatively large, the film cost is not calculated separately, and the weight of the film is calculated in the weight of the aluminum plate for unified calculation. Therefore, according to the above explanation, it can be concluded that the coated aluminum plate is also an aluminum plate, except that the protective film for sluminum panel is added to the ordinary aluminum plate.
4. How to properly tear off the protective film for sluminum panel?
If you want to tear off the protective film for sluminum panel, if it is applied to the surface of the aluminum plate for a short time, it can be easily removed and there will be no residue; if the time is long, the small area can be heated and then removed. If there is residual glue in the process of removal, it can be completely removed by scrubbing with industrial alcohol or gasoline.