Plastic Board Protective Film

Plastic Board Protective Film

The Plastic Board Protective Film is made of a polyethylene film with specific formulation as the base material, and the polyacrylic acid (resin) resin is used as the main material of the pressure sensitive adhesive, and is prepared by coating, slitting and packaging with specific additives.

Product Details

1. Introduction

The Plastic Board Protective Film is made of a polyethylene film with specific formulation as the base material, and the polyacrylic acid (resin) resin is used as the main material of the pressure sensitive adhesive, and is prepared by coating, slitting and packaging with specific additives; protective film The softness is good, the "wetting" speed on the surface to be attached is fast; the peeling strength increase rate after the sticking is low; the stability of the pressure sensitive adhesive is good, and the plasticizer is resistant, which does not adversely affect the surface to be attached.

2. Specification

Base material

PE

Glue series

Acrylic pressure-sensitive   adhesive

Thickness

30micron-100micron

Width

1000mm, 1200mm, 1250mm or   according to your need

Length

200m, 500m, 1000m or according   to your need

Color

Transparent, blue, Red, Yellow   or custom (can be printed)

Adhesive strength

120-400g/25mm

3. Product specifications

1) Dimensions: (500 ~ 1600) mm × (500 ~ 1000) m × (0.03 ~ 0.20) mm [width × length × thickness];

2) Peel strength: 30 ~ 180g / cm (can be customized according to customer's specific conditions)

3) Color type:

4) Product standard colors are: Transparent, white (milk white), blue, black and white. Colors can also be determined based on user requirements or templates. 

4. Our service and advantages

1) We have a lot of experience on OEM work.

2) Well-equipped with extensive sales network.

3) Advanced production equipment and production technique.

4) Competitive price (factory direct price) with our good service.

5) Different designs are available according to customer requests.

6) Excellent quality testing equipment, 100% inspection on critical.

5. FAQ

1) Q:Are you a manufacturer, trading company or a third party?

A: We are a manufacturer, and our company was established in 2010.

2) Q:Where is your factory located?

A: Our factory address is: No. 10, Wuyu Road. Yuqi Street, Huishan District, Wuxi City, Jiangsu Province, China.

3) Q:What is your minimum order quantity?

A: Our minimum quantity is 30,000sqm.

4) Q:Which level of quality are your products?

A: We have got ISO9001:2008, SDS and REACH so far.

image001


Inquiry